单词thermosetting
adj.: 【化】热固(的)
网络: 热固性；热固性塑胶；热固型
【化学】热固(的),热硬性(的),热后就坚硬化(的)
热成形的
热凝的
加热固化
热硬性的
热固性的
THERMOSETTING POWDER PAINTS. DETERMINATION OF DENSITY BY MEANS OF AN AIR PYKNOMETER.
热固性粉状涂料.密度的空气比重瓶测定法
Certain linear polymers, referred to as thermosetting, contain groups which, when heated, react to give cross-linked polymers.
一些被称为热固型聚合物的线型聚合物，含有一些基团，当被加热时就反应得到交联聚合物。
Therefore, the thermosetting plastic unable to repeatedly by reheating molding, thermosetting plastic waste recycling usually is not used.
因此，热固性塑料无法经由再加热来反复成型，所以热固性塑料的废料通常是不可回收再利用的。
Thermosetting plastics can be injection molded but have to be polymerized and molded before they set in the machine.
热硬化性的塑料可能是被形成的注入但是必须在他们之前被聚合而且形成在机器中放置。
Wiped film evaporator was used for the dehydration process of thermosetting PF resin production.
在国内首次采用刮膜蒸发器对热固性酚醛树脂进行脱水。
Such thermosetting resins as phenol-formaldehyde resins, ployester resins, and epoxy resins do not belong to this classification.
像酚醛树脂、聚酯树脂和环氧树脂等热固性树脂不属于此类。
After processing, some plastics cannot be returned to the plastic or moldable state; they are thermosetting plastics or thermosets.
经过处理，有些塑料不能返回到塑料或可塑性状态，它们是热固性塑料或热固性塑料。
Generally speaking, plastic materials can be divided into two broad categories: "thermoplastic" , and "thermosetting plastic" .
一般而言，塑料原料可大分为两大类：「热塑性塑料」（Thermoplastic）及「热固性塑料」（Thermosetting）。
ROLLING STOCK. LAMINATED PANELS WITH DECORATED SURFACE, MADE OF THERMOSETTING RESINS.
铁路车辆.表面用热固性树脂装潢的胶合板
RAILWAY FIXED EQUIPMENT. ENCLOSURES MADE OF COMPOSITE THERMOSETTING MATERIAL FOR VARIOUS EQUIPMENT ALONGSIDE THE TRACKD.
铁路固定设备.沿轨道旁的各种设备的热固性复合材料制围栏