单词close-position
网络: 平仓；关闭位置；密集位置
Check the valve parts before installation. Open and close the valve by hand for a period check the open-close position of the valve gate.
检查阀门各部位是否有松动现象，对阀门进行手动开启、关闭一个周期是否有异常现象，同时检查阀门的启闭位置是否准确。
When installation, please turn the indicator board of this device and the valve to be the CLOSE, position in order to keep them harmonized.
安装时，首先应将阀门和本装置的指示盘均处在关闭的位置，以便协调一致。
Rotate the valve to [CLOSE] position, put in the valve and install screw, nut and washer, then, tighten them up with hand.
将阀门转到关闭的位置，将阀门放入，安装螺丝，螺母及华司，然后用手锁紧。
It was proved that the parallel result is reliability and accuracy by comparing the results of 3D and 2D at close position.
通过相同位置剖面与二维结果的比较很好的证明了计算结果的可靠性和准确性；
There is limit block on the valve disc to ensure the open-close position , which is controlled by the stroke switch.
阀门的启闭位置由行程开关控制，且阀板上设有限位挡块以保证阀板的启闭位置。
leaving little space between a close position
中间无空隙地，位置接近地
Now to close our leg behind we close position to the lock
在锁步时我们要合脚在并脚位置
Close Position of Cehngdu Toursim Fund
成都旅游基金的平仓